GEC4510-485-4G Generator Controller-Fortrust-

Product Introduction:

GEC4500 series controllers include the following controller models;

GEC4510: used for stand-alone automation, which can control the automatic startup and shutdown of the generator set through remote startup signals;

GEC4520: Based on GEC4510, it adds mains power detection and mains/generation automatic switching control functions

(AMF), especially suitable for stand-alone automation systems composed of one city and one machine.

GEC4510-4G: Based on the functions of GEC4510, it realizes remote real-time monitoring of the unit, remote start/stop,

Remote parameter adjustment, starting curve and fault curve and other functions;

GEC4520-4G: Based on the functions of GEC4520, it realizes remote real-time monitoring of the unit, remote start/stop,

Remote parameter adjustment, starting curve and fault curve viewing and other functions;

Working voltage	DC 8V-35V continuous power supply
Overall power consumption	＜3W (≤2W in standby)
Alternator voltage input	Three-phase four-wire 15VAC-360VAC (ph-N) Single-phase two-wire 15VAC-360VAC (ph-N) Two-phase three-wire 15VAC-360VAC (ph-N)
Alternator frequency	50Hz/60Hz
Speed sensor voltage	1.0V to 24V (effective value)
Speed sensor frequency	maximum 10000Hz
Starting relay output	10A DC28V DC power supply output
Fuel relay output	10A DC28V DC power supply output
Programmable relay output 1-4	1A DC28V DC power supply output
Operation panel size	152mm x 100mm x 45mm
Recommended hole size	116mm x 90mm
Current transformer secondary current	Rated: 5A
Working conditions	(-25~70)°C Relative humidity: (20~93)%RH
Storage conditions	temperature (-30~+80)℃
Protection level	IP55 ：when installed between the controller and control panel Waterproof rubber ring IP42 ：when there is no When installing a waterproof rubber ring
Dielectric strength	Object: Between input/output/power supply Reference standard: IEC688-1992 Test method: AC1.5KV/1min leakage current 3mA
Weight	0.32kg